[Skimmertalk] Red Pitaya

[Bob Wilson, N6TV]

OK, but remember that the RP 14 and RP 16 can't use the same version of
start.sh.

73,
Bob, N6TV

On Mon, Jun 3, 2024, 6:26 PM William Liporace <wc2l at wc2l.com> wrote:

> OK,
> I have absolutely NO idea what changed.. I'm on the spare. It is working
> perfectly. I just went through ALL of the files again. Cleaned up a few log
> files and now it is all up and running correctly. I want to revisit the old
> unit with a fresh SD card. As far as I remember, they were both setup by
> you. At the time, you couldn't run everything (CW, RTTY, Digital) on one
> device (If I remember).
>
> I will look at setting up a spare PC and play around. Worst case, make a
> copy of the working SD card and go from there. I have not looked at updates
> or changes in long time. I think I have kept up with most of the software.
>
> Will WC2L
> On 6/2/2024 11:33 PM, Bob Wilson, N6TV wrote:
>
> I forgot to ask, did you move SD cards between the two RPs?  If not, does
> the new RP have a copy of apps/sdr_receiver_hpsdr_122_88/start.sh in the
> root folder to automatically start the SDR receiver app?
>
> 73,
> Bob, N6TV
>
>
> On Sun, Jun 2, 2024 at 8:31 PM Bob Wilson, N6TV <n6tv at arrl.net> wrote:
>
>> As I recall, you have a very complex network environment.  The SkimmerPC
>> and the Red Pitaya have to be on the same subnet of the same LAN or else
>> HermesIntf_xxxx.dll will not be able to locate the RP via its MAC access.
>>
>> xxxx must be the last 4 bytes of the new RP's MAC address.  Do not change
>> SkimSrv.ini.
>>
>> After editing CWSL_Tee.cfg (must be done with Administrator privileges
>> otherwise it gets saved in a "Virtualstore" folder that CWSL_Tee.dll will
>> not find).
>>
>> Finally, after editing CWSL_Tee.cfg, you have to copy it to the C:\RBN
>> folder or wherever Aggreagtor.exe is stored.
>>
>> 73,
>> Bob, N6TV
>>
>>
>> On Sat, Jun 1, 2024 at 8:49 PM William Liporace <wc2l at wc2l.com> wrote:
>>
>>> OK, I guess I'm stumped..
>>> My long time Red Pitaya is tossing errors.
>>> SDR Failure:Timed out waiting for UDP data
>>> Error Access violation at 0x774854E5 (tried to write to 0x00000014),
>>> program terminated.
>>>
>>> When I place my other Red Pitaya in the line.
>>> If I remember correctly, I need to change
>>> CWSL_Tee.cfg, Rename HermesIntf_xxxx.dll, modify SkimSrv.ini
>>>
>>> I can SSL to the new address. it will bascially not run.
>>> Seems like is has no idea where DeviceName=01 CWSL_Tee on RP-F07CD2 v25
>>> is. (not sure v25 is needed)
>>>
>>> SkimSrv in the receiver say it is 01 CWSL_Tee unknown
>>>
>>> Ideas, what am I doing wrong? not what I expected.
>>>
>>> Will WC2L
>>>
>>> --
>>> William Liporace WC2Lhttp://www.wc2l.com or http://dxc.wc2l.com
>>> AR-Cluster Node  telnet dxc.wc2l.com 7373 or 144.93 MHzwc2l at wc2l.com
>>>
>>> _______________________________________________
>>> Skimmertalk mailing list
>>> Skimmertalk at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/skimmertalk
>>>
>> --
> William Liporace WC2Lhttp://www.wc2l.com or http://dxc.wc2l.com
> AR-Cluster Node  telnet dxc.wc2l.com 7373 or 144.93 MHzwc2l at wc2l.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/skimmertalk/attachments/20240603/52f0fd08/attachment-0001.html>