[Skimmertalk] Red Pitaya

[William Liporace]

I own two of the RP 16.

Will WC2L

On 6/3/2024 9:38 PM, Bob Wilson, N6TV wrote:
> OK, but remember that the RP 14 and RP 16 can't use the same version 
> of start.sh.
>
> 73,
> Bob, N6TV
>
> On Mon, Jun 3, 2024, 6:26 PM William Liporace <wc2l at wc2l.com> wrote:
>
>     OK,
>     I have absolutely NO idea what changed.. I'm on the spare. It is
>     working perfectly. I just went through ALL of the files again.
>     Cleaned up a few log files and now it is all up and running
>     correctly. I want to revisit the old unit with a fresh SD card. As
>     far as I remember, they were both setup by you. At the time, you
>     couldn't run everything (CW, RTTY, Digital) on one device (If I
>     remember).
>
>     I will look at setting up a spare PC and play around. Worst case,
>     make a copy of the working SD card and go from there. I have not
>     looked at updates or changes in long time. I think I have kept up
>     with most of the software.
>
>     Will WC2L
>
>     On 6/2/2024 11:33 PM, Bob Wilson, N6TV wrote:
>>     I forgot to ask, did you move SD cards between the two RPs?  If
>>     not, does the new RP have a copy of
>>     apps/sdr_receiver_hpsdr_122_88/start.sh in the root folder to
>>     automatically start the SDR receiver app?
>>
>>     73,
>>     Bob, N6TV
>>
>>
>>     On Sun, Jun 2, 2024 at 8:31 PM Bob Wilson, N6TV <n6tv at arrl.net>
>>     wrote:
>>
>>         As I recall, you have a very complex network environment. 
>>         The SkimmerPC and the Red Pitaya have to be on the same
>>         subnet of the same LAN or else HermesIntf_xxxx.dll will not
>>         be able to locate the RP via its MAC access.
>>
>>         xxxx must be the last 4 bytes of the new RP's MAC address. 
>>         Do not change SkimSrv.ini.
>>
>>         After editing CWSL_Tee.cfg (must be done with Administrator
>>         privileges otherwise it gets saved in a "Virtualstore" folder
>>         that CWSL_Tee.dll will not find).
>>
>>         Finally, after editing CWSL_Tee.cfg, you have to copy it to
>>         the C:\RBN folder or wherever Aggreagtor.exe is stored.
>>
>>         73,
>>         Bob, N6TV
>>
>>
>>         On Sat, Jun 1, 2024 at 8:49 PM William Liporace
>>         <wc2l at wc2l.com> wrote:
>>
>>             OK, I guess I'm stumped..
>>             My long time Red Pitaya is tossing errors.
>>             SDR Failure:Timed out waiting for UDP data
>>             Error Access violation at 0x774854E5 (tried to write to
>>             0x00000014), program terminated.
>>
>>             When I place my other Red Pitaya in the line.
>>             If I remember correctly, I need to change
>>             CWSL_Tee.cfg, Rename HermesIntf_xxxx.dll, modify SkimSrv.ini
>>
>>             I can SSL to the new address. it will bascially not run.
>>             Seems like is has no idea where DeviceName=01 CWSL_Tee on
>>             RP-F07CD2 v25 is. (not sure v25 is needed)
>>
>>             SkimSrv in the receiver say it is 01 CWSL_Tee unknown
>>
>>             Ideas, what am I doing wrong? not what I expected.
>>
>>             Will WC2L
>>
>>             -- 
>>             William Liporace WC2L
>>             http://www.wc2l.com  orhttp://dxc.wc2l.com
>>             AR-Cluster Node  telnetdxc.wc2l.com  <http://dxc.wc2l.com>  7373 or 144.93 MHz
>>             wc2l at wc2l.com
>>
>>             _______________________________________________
>>             Skimmertalk mailing list
>>             Skimmertalk at contesting.com
>>             http://lists.contesting.com/mailman/listinfo/skimmertalk
>>
>     -- 
>     William Liporace WC2L
>     http://www.wc2l.com  orhttp://dxc.wc2l.com
>     AR-Cluster Node  telnetdxc.wc2l.com  <http://dxc.wc2l.com>  7373 or 144.93 MHz
>     wc2l at wc2l.com
>
-- 
William Liporace WC2L
http://www.wc2l.com  orhttp://dxc.wc2l.com
AR-Cluster Node  telnet dxc.wc2l.com 7373 or 144.93 MHz
wc2l at wc2l.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/skimmertalk/attachments/20240604/f5ac08d2/attachment.html>