OMNI V QRP mod

Scott Rosenfeld NF3I ham@w3eax.umd.edu
Sat, 3 Aug 1996 06:58:07 +1030


Ten-Tec's presence on the net has ALREADY proved fruitful!

Scott, KY2P, forwarded me the mod to allow the OMNI V to be cranked down 
to about 1 watt while retaining the ability to run 100 watts.

On the 9 MHz IF board:

R46 change from 100 to 10 kohms, then reset R48, the ALC pot.

That's it.  Did it last night, my QRPp OMNI V is doing great!  Verified 1 
watt output on my Oak Hills WM-1.

* Scott Rosenfeld NF3I Burtonsville, MD FM19mc QRV 80-10/6/2/440 *
*** 6m 75 grids worked on 8 watts *** HF 138 cfmd * QRP-L #147 ***
** QRP ARCI #9054 ** DXCC/WAS/WAC *** 100% dipole powered HF/6m **
* 301-549-1022 h / 301-982-1015 w *** 145.490- 147.225+ PL 156.7 *