[TenTec] Ten-Tec 1208 xverter

[Scott Rosenfeld NF3I]

The choice of 20m as an IF is not really a bad one, IMHO, although more 
common would be 10 meters.

When it comes down to it, $100 including shipping for the 6m xverter kit 
is a total bargain.  The unit does what it should - decent receive 
conversion, and 8 or so watts out on xmit. 

Plenty of drive for an amp, or for decent openings (see below).

BTW, the inclusion of an attenuator pad INSIDE the unit makes it able to 
hook directly to the output of ANY radio capable of putting out as little 
as 5 watts (variable from 0.25 to 10 watts given a different resistor in 
the attenuator pad).  A BIG plus, IMHO.  Best $100 I ever spent.

* Scott Rosenfeld NF3I Burtonsville, MD FM19mc QRV 80-10/6/2/440 *
*** 6m 80 grids worked on 8 watts *** HF 140 cfmd * QRP-L #147 ***
** QRP ARCI #9054 ** DXCC/WAS/WAC *** 100% dipole powered HF/6m **
* 301-549-1022 h / 301-982-1015 w *** Hamfest, life's simple joy *


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm