[TenTec] Titan Plate Voltage ?

Tyler Stewart k3mm@erols.com
Fri, 7 Nov 1997 23:55:24 -0000


One thing to make sure of is that your meter actually reads correctly...I've
seen some widely varying readings...especially on the power meter.

73, Ty K3MM

-----Original Message-----
From: Chester Alderman <chestert@pressroom.com>
To: tentec@contesting.com <tentec@contesting.com>
Date: Friday, November 07, 1997 17:54
Subject: Re: [TenTec] Titan Plate Voltage ?


>My six year old Titan reads about 2200 volts no-load, and about 1800 volts
>at 1.5 Kw out.
>
>73,
>
>
>
>At 09:00 AM 11/7/97 -0500, you wrote:
>>What plate voltage (load and no-load) would one expect to see on a
>>properly operating relatively late model (5-6 years old) Titan?
>>
>>thanks & 73  James / k1sd
>>
>>--
>>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>>Submissions:              tentec@contesting.com
>>Administrative requests:  tentec-REQUEST@contesting.com
>>Problems:                 owner-tentec@contesting.com
>>Search:                   http://www.contesting.com/km9p/search.htm
>>
>Chester Alderman
>Tom - W4BQF
>chestert@pressroom.com
>
>
>--
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm