[TenTec] How to -PROPERLY- connect Corsair II to Centurion

[Conway Yee]

Text of message from kr4wm@sccoast.net, 6 Mar 1998, 06:39 AM
>> have to be external to your rig.  But, in this case, the amp does QSK

>Hi Duane! Yep, if I had an external keyer, I _could_ use the amp
>QSK- however, my Corsair II has a built-in keyer, and keying
>through the amp would render it useless!

Are you sure?  If I recall correctly, the output of the built-in
keyer is to a jack outside.  The signal is then routed back into the
rig via a jumper.  Thus, it is really an external keyer with the
box inside the rig!  Just remove the jumper and use the signal from
the keyer.

tnx es 73 de Conway Yee

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm