[TenTec] Ten Tec Cure for Clicking Omni 6 a No Go

[James Parsons]

When you find the answer, maybe it will also give me an answer to why my
Ten-Tec 1340 QRP Transceiver clicks so badly on it's sidetone. I put in
the mod recommended by TT, but it still clicks much too loud. The
clicking takes place on the lagging end of the waveform. At higher
speeds (30 WPM) it will drive you crazy.

Jim, K5ROV

"Dale L. Martin" wrote:
> 
> Let's beat this thing to death here....Two weeks ago, I sat
> through the whole SS CW Contest with the 'clicks'.
> 
> I even ran the sidetone down to zero (off) and the clicks were
> still present in the internal speaker, headphones, and external
> speaker.
> 
> Has anyone done any further investigation as to the source of the
> clicks?
> 
> I'm going to see if I can borrow an oscilloscope from our club
> test bench and see if i can follow the noise backwards to it's
> source...at least to the board it may be sourced from.
> 
> I don't know about others, but the heightened awareness of it's
> existence has now placed the 'click' on the same level as a
> dripping water faucet in the bathtub.....
> 
> 73,
> dale, kg5u
> kg5u@hal-pc.org
> 
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm

-- 

James (Jim), Parsons, K5ROV USAF, Ret. 58 yrs a HAM
k5rov@wcc.net, ICQ-17012707,  QCWA, NWQRP, Fists, ARRL
EX: W1RLA, K5FBB, K4FEO, SV0WN (CRETE), SV0WN (RHODES),
DL4NC, DL4JP, KA2FC (JAPAN), KA2JP (JAPAN).
JOHN 3:16

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm