[TenTec] RF & Pegasus

[Greg Hodsdon]

Dale:
Pin 2 is grounded on the Pegasus mic jack. It's the threaded portion of the mic
jack body that is isolated. On the modified D-104 stand I am using the cable shield
connected to the mic plug body for the ground return of the PTT. With the mic jack
isolated the PTT is not functional. I did discuss this with Tentec and they had no
objection to grounding the jack on the panel. In the process, I will also review
the mic stand wiring scheme.
73 de Greg, K7KJ

Dale L. Martin wrote:

> Lacking a schematic for the Pegasus, I wonder if it wouldn't be prudent to
> discuss the grounding of the pin 2 with Ten-Tec first.  From previous posts, my
> understanding is that the speaker audio output jack ground is floating also.
> There may be some problems generated as a result of grounding pin 2 to chassis.

 


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm