[TenTec] Terminal Program

John - G3JAG patents@dx0man.prestel.co.uk
Sat, 13 Nov 1999 10:28:30 -0000 (GMT)


Ka-GOLD from Interflex works extremely well; there is a free demo
version at www.interflex.com. Unfortunately, like most good programmes,
Ka-GOLD is not exactly inexpensive, but it will certainly handle the
KAM (both ports, all HF modes). I have it running 24 hrs a day here on
my 70cms mailbox, alongside my logbook package, never a glitch. It runs
under Windows - or DOS, any version of Windows. I have even run it under
Linux using the DOS emulator package.
I have also run two copies of it side by side, windowed and talking to
two separate KPC-3's on 2m and 70cms. No problem. I think it is magic.
John G3JAG
On 13-Nov-99 ac5aa@juno.com wrote:
> 
> Bob,
>       If you want a multi-protocol program written to work with the
KAM,
> try
> XPWare.  He has a free demo that will run for 100 times before it
> times
> out and you have to pay for it.  It will use the dual-port
> capabilities
> of the KAM also.   I didn't bookmark the site, but if you search on
> XPWare you'll find it.  If you want logging software that will use
> the
> KAM, DX4WIN works well (but does not support dual-port operation). 
> For a
> freebie terminal program, chick out Hilgreave's HyperTerminal which
> is
> free for download over the web.  It works fine for a standard
> terminal
> program.
> 
>       73,  Duane   AC5AA
> 
> 
> On Fri, 12 Nov 1999 20:11:24 -0500 Robert Weingaertner
> <weingaertner@nac.net> writes:
>> 
>> Hi gang,
>> 
>> I run a Kantronics KAM (the original with some upgrades) with my
>> Paragon I for the digital modes. I've run it with an old PC
>> portable (4.9 MHz 8088). Alright laugh, but running YAPP as
>> a terminal its adequate.
>> 
>> I also have an IBM Aptiva running Windows 95. Its time to switch
>> the KAM over to the new PC. Can anyone recommend a decent terminal
>> program that will run in Windows? I tried a couple from the QRZ
>> CD ROM but I either can't unzip them or they don't work properly.
>> 
>> OR, should I forget about RTTY, AMTOR and PACTOR and just run CW?
>> 
>> Thanks!
>> 
>>                      Bob WB2VUF
>> 
>> --
>> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>> Submissions:              tentec@contesting.com
>> Administrative requests:  tentec-REQUEST@contesting.com
>> Problems:                 owner-tentec@contesting.com
>> Search:                   http://www.contesting.com/km9p/search.htm
>> 
> 
> Duane A. Calvin, AC5AA
> Austin, Texas
> ac5aa@juno.com -or- ac5aa@earthlink.net
> Day:  dacalvin@us.ibm.com
> 
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm

----------------------------------
E-Mail: John - G3JAG <patents@dx0man.prestel.co.uk>
Date: 13-Nov-99
Time: 10:04:42

This message was sent by XFMail
----------------------------------

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm