[TenTec] Pegasus / 705 mic

[Al Patrick]

>

I can tune the Pegasus and get from very low (< 3 watts) to a full 100 watts with
about a 1.00 to 1 SWR; however, when I key the mic I always get 0 watts out!  (The
software interface and the tuner agree on the wattage - except very low end.)  It
doesn't matter if I press the momentary button or the maintained one.  PTT / VOX
switch is in the PTT position.  No battery is in the mic, but I installed one
temporarily with the same results.  All interface indications are that I'm
transmitting, but with 0 watts out!

What is the next  thing to check?

(If it's as simple as the last question I had I'm going to feel real dumb!  <g>  )





--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm