[TenTec] Pegasus / 705 mic

[Michael O. Hyder]

Have you tried talking into the mic?  Have you adjusted a mic gain if there
is one?

Mike N4NT@wireco.net

----- Original Message -----
From: "Al Patrick" <arp@inet4u.com>
To: <tentec@contesting.com>
Sent: Sunday, February 06, 2000 9:19 PM
Subject: [TenTec] Pegasus / 705 mic


>
> >
>
> I can tune the Pegasus and get from very low (< 3 watts) to a full 100
watts with
> about a 1.00 to 1 SWR; however, when I key the mic I always get 0 watts
out!  (The
> software interface and the tuner agree on the wattage - except very low
end.)  It
> doesn't matter if I press the momentary button or the maintained one.  PTT
/ VOX
> switch is in the PTT position.  No battery is in the mic, but I installed
one
> temporarily with the same results.  All interface indications are that I'm
> transmitting, but with 0 watts out!
>
> What is the next  thing to check?
>
> (If it's as simple as the last question I had I'm going to feel real dumb!
<g>  )



--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm