[TenTec] Filter Insertion Loss

[Steve Ellington]

Ed
All I can tell you is that Q1 does provide the make-up gain for the filter
loss. When everything is working properly, you won't see any S meter change
after kicking in the 500hz filter unless something is wrong with the filter.

Steve
N4LQ
----- Original Message -----
From: "Ed & Edna" <edn4pk@vol.com>
To: "TenTec" <tentec@contesting.com>
Sent: Sunday, February 13, 2000 8:49 PM
Subject: [TenTec] Filter Insertion Loss


>
> To cure insertion loss on the Omni-C is the cure to replace Q1 on the
filter
> board ?? Mine has about a 2 to 3 S-unit loss when I kick in the 500hz
> filter. I know this was talked about before, but couldn't find it in the
> archives.
> Thanks
> Ed
> W3NR
>
>
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm