[TenTec] CW Key Clicks and Filters

[Mike Hyder -N4NT-]

Maybe we need new suffixes:
579c for chirps
579k for clicks
579h for hash
579s for secondary carrier
579gg for general garbage on your signal, OM
579ih indescribably horrible signal

Mike

----- Original Message -----
From: <AC5E@aol.com>
To: <w8au@sssnet.com>
Cc: <tentec@contesting.com>
Sent: Wednesday, November 27, 2002 7:10 AM
Subject: Re: [TenTec] CW Key Clicks and Filters


> Yes, the RST system does use the c for chirp and k  for key clicks. And I
do
> use those when the occasion warrents.
>
> But the system does not provide for what to me is the most annoying keying
> artifact of them all. Phase noise. When the bands are quiet it's not at
all
> unusual to hear this junk 50 kc, kHz, away from a carrier.
>
> I often track down a station calling CQ "tuning by S meter" following the
> pish pa pish pa  pish pish pa pish and so forth until I find the carrier.
And
> it's not at all unusual to listen to the ensuing QSO and find the
offending
> station is using one of a handful of popular high dollar rigs. Thank
goodness
> TenTecs are quiet!
>
> Because when the bands are busy this racket runs together to become "radio
> smog." And all the weak ones we all want to work are under that junk.
>
> 73  Pete Allen  AC5E