[TenTec] Jupiter Issue

Joe Malloy jmalloy@stny.rr.com
Sat, 21 Sep 2002 11:25:30 -0400

Methinks you have some RF floating around the shack -- I can duplicate that
sort of behavior on 15 meters or higher frequencies when I don't have the
rig properly grounded.  The Jupiter's control is very sensitive to RF in the

Good luck!


Joe, W2RBA

> -----Original Message-----
> From: tentec-admin@contesting.com [mailto:tentec-admin@contesting.com]On
> Behalf Of J. Duffy Beischel
> Sent: Saturday, September 21, 2002 10:57 AM
> To: tentec@contesting.com
> Subject: [TenTec] Jupiter Issue
> I installed 1.23 of the firmware and have a new, but very strange problem.
> I am using an LDG AT 11MP autotuner with the Jupiter.  When on 15
> meters, and this only happens on 15 meters, if I press the tune button
> on the Jupiter, the rig immediately changes frequency to somewhere
> between 20 and 22 Mhz.  I have tried all other bands and everything
> works fine on those bands.  Anyone else experience this?