[TenTec] "Studio One" and a Jupiter
Mark Erbaugh
mark at microenh.com
Mon Feb 17 16:38:06 EST 2003
You can get a nice mic clip (not a clip, but actually formed to fit a round
mic - works great with my Heil GM-4) from Radio Shack for about $4 - at
least I did a couple of years ago.
Mark
----- Original Message -----
From: "David W LeJeune, Sr" <lejeuned at centurytel.net>
To: <tentec at contesting.com>
Sent: Monday, February 17, 2003 16:04 PM
Subject: Re: [TenTec] "Studio One" and a Jupiter
> I'm currently using the new TenTec/Heil mic with my Jupiter. Sounds great
> based on on-the-air reports on 75 Meters. Also plenty of drive - full
power
> with about 25% audio as indicated on the front panel screen. The Heil
mic's
> must be close talked, however. Since I don't like to hand hold my mic, I
> finally decided to spring for the Heil boom mic holder from TenTec.
> Interestingly enough, that boom holder doesn't come with the mic clip, and
> TenTec doesn't stock it. Had to order that direct from Heil.
>
> Dave K5WNV
>
> ----- Original Message -----
> From: "Bill Brannick" <wmlb at attbi.com>
> To: <tentec at contesting.com>
> Sent: Monday, February 17, 2003 12:57 PM
> Subject: [TenTec] "Studio One" and a Jupiter
>
>
> > Has anyone paired up this new Heil mic with a Jupiter? Would be
interested
> > in hearing your comments.. in particular if you have previously used
> > a Heil mic with the HC-4/5. on your Jupiter. I know there were some
> folks
> > here who thought that the output of the prior Heil microphones was not
> > adequate to properly drive the Jupiter. (There were exceptions to that..
> > but perhaps they were the owners of a more "booming" voice quality.
> >
> > Bill, W6WLB
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
More information about the TenTec
mailing list