[TenTec] Omni VI filter macros, etc. for MixW v2.0x

[John Clifford]

> However,  the macros as stated in John's posting were written for the Icom
> IC-756PRO and PRO2  CI-V command sets.  I am very surprised that
> the Omni Vi
> and PROs share a common command language.

George had posted a similar macro for his 756 Pro, I just copied the idea
and made it work for the Omni VI.

For those of you who are running software that doesn't support the Ten-Tec
Omni VI (like MixW) choose 'Icom 735' and you will be okay.

The Ten-Tec Omni command set is a superset of that of the IC-735.  I don't
believe you can control xmit/rcv via software for the IC-735, for instance.
There are other commands (some mentioned in the Ten-Tec Omni VI manual, some
not... like how to select the narrow filter) available for the
intellectually curious.

 - jgc

John Clifford KD7KGX

Heathkit HW-9 WARC/HFT-9/HM-9
Elecraft K2 #1678 /KSB2/KIO2/KBT2/KAT2/KNB2/KAF2/KPA100
Ten-Tec Omni VI/Opt1

email: kd7kgx at arrl.net