[TenTec] Orion questions

[Greg Fischer]

Thanks Tom.. Some others have told me to try different headphones as the heil does not seem to be a good impedence match for the Orion.  I will see what else I can try that works well.  

CUL
Greg

  ----- Original Message ----- 
  From: Thomas Jednacz 
  To: tentec at contesting.com 
  Cc: ditsnbits at tentec.com 
  Sent: Sunday, May 18, 2003 11:49 AM
  Subject: RE: [TenTec] Orion questions



  OK all.... Now that I have been playing with this new rig for about 2 days
  straight, I have a couple  questions to see if others perform the same or
  maybe I have something set wrong, which certainly can be the case.

  Hi Greg - Sometimes when you turn the rig on it boots strangely. Try turning
  if off and on again and if that does not help then do a Master Reset - turn
  rig off, hold the Main TX/RX button in while turning the rig on and continue
  holding it until it says the Master Reset Complete. Save your USER SETTINGS
  by answering NO to Erase User Memories?. If you have saved your User
  Settings (USER 1 button) then a press of the button will get you back where
  you started.

  I have not heard the mushy audio or the tone you describe. My audio is
  beautiful on both CW and SSB.

  73, Tom, W7QF

  _______________________________________________
  TenTec mailing list
  TenTec at contesting.com
  http://lists.contesting.com/mailman/listinfo/tentec