[TenTec] centurion mod made easier !

[Duane A Calvin]

John,
        If you're not sure, and if no one here responds who has done this
mod, I'd suggest waiting until Monday and calling TT's techs.  They will
be happy to make it clear what they are describing.  

        73,  Duane


On Sat, 1 Nov 2003 22:30:48 -0600 "John" <brazos at rochester.rr.com>
writes:
> Hi all !  I have a Jup and a centurion abut 3 years old.  I was told 
> over the phone from the factory that I needed to place a jumper wire 
> across a diode in order to make my centurion work .  This mod I am 
> talking about is the mod to make the centurion work with new radios. 
>  I know wich diode and have the manual but I am a loss on exactly 
> what the tech at the factory ment by soldering a jumper wire to the 
> diode . I think I know ie. using a very short pice of wire ( 
> insulated ? ) and soldering one end of the wire  to one end of the 
> diode and solder the other end of the wire to the other end of the 
> diode ?  my understanding of this  termenology is so simple I loose 
> a lot in the translation .  can any one tell me how to perform this 
> mod in non electronic jargon ? what the heck is a jumper wire ?    
> Thanks  John 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> 


--------------------------------------
Duane Calvin, AC5AA
Austin, Texas

http://home.austin.rr.com/ac5aa