[TenTec] scout display problem with 40 meter module

[Larry]

Mike

The only time I have had that problem was when the module was not firmly
seated in place.
W5wbl
----- Original Message -----
From: "MIKE BRYCE" <prosolar at sssnet.com>
To: <TenTec at contesting.com>
Sent: Saturday, November 22, 2003 4:45 PM
Subject: [TenTec] scout display problem with 40 meter module


> here's an unusual problem.
>
> I have two scout transceivers. two forty modules.
>
> one of the modules causes the display to become unstable when in transmit
on
> ssb. cw seems to be fine. it's the module, because I can move it from one
> radio to the other and the problem follows the module.
>
> so, after I have taken the module apart and looked for the obvious broken
> solder joints, has anyone ever had this problem with a band module?
>
> Mike Bryce, WB8VGE
> SunLight Energy Systems
>
> http://www.seslogic.com
> http://www.theheathkitshop.com
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>