[TenTec] scout display problem with 40 meter module

[MIKE BRYCE]

the problem... is only there with this one module, in either scout radios..
so, the bug has to be with the module...


Mike Bryce, WB8VGE
SunLight Energy Systems

http://www.seslogic.com
http://www.theheathkitshop.com


> From: "Larry" <w5wlb at gbronline.com>
> Reply-To: tentec at contesting.com
> Date: Sun, 23 Nov 2003 07:30:05 -0600
> To: <tentec at contesting.com>
> Subject: Re: [TenTec] scout display problem with 40 meter module
> 
> Mike
> 
> The only time I have had that problem was when the module was not firmly
> seated in place.
> W5wbl
> ----- Original Message -----
> From: "MIKE BRYCE" <prosolar at sssnet.com>
> To: <TenTec at contesting.com>
> Sent: Saturday, November 22, 2003 4:45 PM
> Subject: [TenTec] scout display problem with 40 meter module
> 
> 
>> here's an unusual problem.
>> 
>> I have two scout transceivers. two forty modules.
>> 
>> one of the modules causes the display to become unstable when in transmit
> on
>> ssb. cw seems to be fine. it's the module, because I can move it from one
>> radio to the other and the problem follows the module.
>> 
>> so, after I have taken the module apart and looked for the obvious broken
>> solder joints, has anyone ever had this problem with a band module?
>> 
>> Mike Bryce, WB8VGE
>> SunLight Energy Systems
>> 
>> http://www.seslogic.com
>> http://www.theheathkitshop.com
>> 
>> 
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>