[TenTec] Scout Questions

[Edward Crawford]

Thanks to all who replied to my query. All the info will be most helpful.
Have a good weekend. 73
ed/w4wvw
  ----- Original Message ----- 
  From: w8au at sssnet.com 
  To: tentec at contesting.com 
  Sent: Saturday, October 11, 2003 10:52 AM
  Subject: Re: [TenTec] Scout Questions


  At 12:38 AM 10/11/2003, you wrote:
  >Did the early rigs transmit full power in the tune position?

  YES

  >According to the manual and from everything I have read it says 15 watts 
  >on tune.

  A LATER CHANGE.

  >How does the mobile bracket attach to the radio?

  REMOVE THE TOP COVER SCREWS, PUT THE BRACKET IN PLACE.  REPLACE SCREWS.

  >I have read that the factory bracket was not very substantial and would 
  >like to fabricate one of my own if possible.

  THIS IS THE THING TO DO.  USE 1/8" ALUMINUM.  ORIGINAL IS THIN STEEL.

  the goal is to use it mobile. I have it installed mobile now but needing to 
  do a little more work on the wiring and grounding and mounting. This is my 
  first attempt at HF mobile besides 10M and it seems to be a bit of a challenge.

  BE SURE TO CUSHION YOUR MOUNTING.  (WITHIN THE BRACKET)  THE PTO IS SO 
  CLOSE TO THE TOP/BOTTOM COVERS THAT ANY MOVEMENT OF SAME WILL CAUSE FREQ TO 
  MOVE SLIGHTLY.

    I have never thought about SWR changing at hiway speeds.

  YES, OVERHEAD BRIDGES WILL AMAZE YOU (IF YOU'RE LOOKING AT THE SWR!).  THE 
  FAST ACTING BREAKERS MAY TRIP IF YOU
  ARE TRANSMITTING WHEN NEAR A BRIDGE OR LARGE TREE BRANCH.   IF YOU'RE USING 
  A FUSE ONLY, THE SLOW-BLOW TYPES ARE
  FORGIVING OF THIS SOMEWHAT.

  HAVE FUN...

  PERRY   W8AU   (STILL A CW/MOBILE USER OF SCOUT AFTER TEN YEARS.....)

  _______________________________________________
  TenTec mailing list
  TenTec at contesting.com
  http://lists.contesting.com/mailman/listinfo/tentec