[TenTec] Argo V control

[J. D.]

The Argonaut V can be controlled with the same software as the Orion and the
Jupiter/Pegasus.  N4PY confirmed this as did Nick creator of MixW.  The only
difference is that you can only communicate with the Argonaut V at 1200 baud
  

Duffy
www.wb8nut.com 
 
-------Original Message-------
 
From: tentec at contesting.com
Date: Wednesday, September 03, 2003 9:11:11 PM
To: tentec at contesting.com
Subject: Re: [TenTec] Argo V control
 
Marty,
 
The Argo has it's own protocol. I don't think it emulates any other radio
(even other TenTec's). You can download the protocol specifications from the
web at
 
http://www.rfsquared.com/ArgoV/ArgoVmain.htm
 
It's called the Programmer's Reference Guide.
 
73,
Mark
 
----- Original Message -----
From: "Martin Hartwell" <chartwell at worldnet.att.net>
To: "tentec mail list" <tentec at contesting.com>
Sent: Wednesday, September 03, 2003 3:24 PM
Subject: [TenTec] Argo V control
 
 
> Hi
>
> I know that once I order Carl's software I can control my Argo V, but
> what does it emulate, the kenwood? Seems I have heard that. In another
> way to putting it, if I already have a software package that works on
> some other rigs what might work here. I know when I had my K2, if I told
> it I was connected to a kenwood it should work.
>
> Any ideas?
>
> Marty
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
 
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
.