[TenTec] Frequency Knob lock for a Corsair I
kd5inm
kd5inm at texwire.com
Wed Sep 3 22:46:58 EDT 2003
Is there a way to put a frequency lock button or lock to stop the
frequency knob from moving on a Ten Tec Corsair I? Is the inside mechanism
like those in a Icom 211 or IC-551 which uses a LED and phototransistor
along with a slotted wheel to change the frequncy, if so I think I could add
one by turning off the LED's, a friend of mine is blind and occasionally he
bumps the knob which knocks him off frequency, we'd like to add a switch of
somekind to stop the freq. from changing if he bumps it with his hand while
working the front panel.
Thanks all for the help, 73' John Hamilton ,kd5inm
----- Original Message -----
From: <tentec-request at contesting.com>
To: <tentec at contesting.com>
Sent: Tuesday, September 02, 2003 11:01 AM
Subject: TenTec Digest, Vol 9, Issue 4
> Send TenTec mailing list submissions to
> tentec at contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/tentec
> or, via email, send a message with subject or body 'help' to
> tentec-request at contesting.com
>
> You can reach the person managing the list at
> tentec-owner at contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TenTec digest..."
>
>
> Today's Topics:
>
> 1. Re: Titan 425 and Paragon 585 and lots of non-Ten-Tec
> gear
> 2. Re: PTO - mechanical problem. help! (Don Rasmussen)
> 3. Re: Please delete me from the subscriber list (W3UIO)
> 4. Re: PTO - mechanical problem. help!
> (Dr. Gerald N. Johnson, electrical engineer)
> 5. Orion "spot" button (Bill Tippett)
> 6. DRM and Jupiter (John T. Fleming)
> 7. Re: KWM-2 and 312B-4 are spoken for (Hobbes)
> 8. N4PY Pegasus/Jupiter Control Program Version 2.10 (N4PY)
> 9. Re: Fw: Orion SSB
> 10. Full mailbox Titan and Paragon (Stan Jacox)
> 11. Re: Full mailbox Titan and Paragon (dave dabay)
>
>
> ----------------------------------------------------------------------
>
> Date: Mon, 01 Sep 2003 20:47:26 -0400
> From: w8au at sssnet.com
> To: tentec at contesting.com
> Subject: Re: [TenTec] Titan 425 and Paragon 585 and lots of non-Ten-Tec
> gear
> Message-ID: <5.2.1.1.0.20030901204523.00a80040 at mail.sssnet.com>
> In-Reply-To: <LAW9-OE37E92pfrGkLE00004358 at hotmail.com>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
> MIME-Version: 1.0
> Precedence: list
> Reply-To: tentec at contesting.com
> Message: 1
>
> At 01:49 PM 09/01/2003, you wrote:
> >Lots of H-P and Tektronix test equipment, RF and audio type.
> >H-P606A H-P608E Marconi RF generators
> >Lots of 465 scopes
> >Many 403B, 400el, 400FL AC VMs etc.
>
> Stan:
> Do you have a file listing all the test gear?
>
> ..... and prices?
>
> Tnx,
>
> Perry w8au
>
> ------------------------------
>
> Date: Mon, 1 Sep 2003 18:07:45 -0700 (PDT)
> From: Don Rasmussen <wb8yqj at yahoo.com>
> To: tentec at contesting.com
> Subject: [TenTec] Re: PTO - mechanical problem. help!
> Message-ID: <20030902010745.53899.qmail at web12405.mail.yahoo.com>
> Content-Type: text/plain; charset=us-ascii
> MIME-Version: 1.0
> Precedence: list
> Reply-To: tentec at contesting.com
> Message: 2
>
> One point of clarification, I wrote:
>
> >> Either that, or the PTO box is not square and in
> good alignment, and at the front of the box where
> there
> should be 3 bearings pressing in the race, there are
> only two and that's allowing the entire shaft to
> vibrate a little.
>
> What I meant was, that the 3 bearings are present of
> course, but that if the worm shaft is not at the
> proper perpendicular angle to the race mount, only two
> of the bearings may be supporting the shaft. That
> would leave the shaft only partially supported and
> prone to vibration. I've had a couple great comments
> on failure modes of the PTO mechanics - please keep
> them coming!
>
> Thanks es 73,
> Don Rasmussen
> Carlsbad, Ca.
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
> ------------------------------
>
> Date: Mon, 1 Sep 2003 18:12:48 -0700 (PDT)
> From: W3UIO <amishbuggy37 at yahoo.com>
> To: tentec at contesting.com
> Subject: Re: [TenTec] Please delete me from the subscriber list
> Message-ID: <20030902011248.12470.qmail at web41006.mail.yahoo.com>
> In-Reply-To: <3F5392F5.6040304 at sbcglobal.net>
> Content-Type: text/plain; charset=us-ascii
> MIME-Version: 1.0
> Precedence: list
> Reply-To: tentec at contesting.com
> Message: 3
>
> Not a chance, Jim. TNX FER what you do!
> 73, Larry
> --- Jim Lowman <jmlowman at sbcglobal.net> wrote:
> > Wow...I think I may have been replaced! :-)
> >
> > 73 de Jim - AD6CW
> > The listadmin of record (as far as I know)
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
> ------------------------------
>
> Date: Mon, 01 Sep 2003 20:09:47 -0500
> From: "Dr. Gerald N. Johnson, electrical engineer" <geraldj at isunet.net>
> To: tentec at contesting.com
> Subject: Re: [TenTec] PTO - mechanical problem. help!
> Message-ID: <3F53EDDB.1466 at isunet.net>
> References: <20030901220302.70565.qmail at web12401.mail.yahoo.com>
> Content-Type: text/plain; charset=us-ascii
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Reply-To: geraldj at isunet.net, tentec at contesting.com
> Message: 4
>
> Lumpy grease on the screw?
>
> In my Corsair's PTO it tuned poorly going down compressing the spring,
> there was a great deal of slip in the vernier because of a deep groove
> worn (crooked too) by the balls. A new race, knob shaft and grease job
> fixed it. The PTO frame does not make the race settle perfectly
> perpendicular to the shaft.
>
> 73, Jerry, K0CQ
>
> --
> Entire content copyright Dr. Gerald N. Johnson, electrical engineer.
> Reproduction by permission only.
> ------------------------------
>
> Date: Mon, 01 Sep 2003 22:41:23 -0400
> From: Bill Tippett <btippett at alum.mit.edu>
> To: tentec at contesting.com
> Subject: [TenTec] Orion "spot" button
> Message-ID: <5.2.1.1.0.20030901223756.02bcc4e0 at pop.vnet.net>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
> MIME-Version: 1.0
> Precedence: list
> Reply-To: tentec at contesting.com
> Message: 5
>
> Apparently I confused several guys with my 300 Hz
> Spot comment. Orion's Spot (aka Pitch) control is variable
> from 300 to 1200 Hz in 10 Hz steps. I just wish it went
> down to 200 Hz to accommodate my unusual preferences
> for very weak signal work. My ears sometimes like ~250 Hz
> for EXTREMELY weak signals.
>
> 73, Bill W4ZV
>
> ------------------------------
>
> Date: Mon, 1 Sep 2003 22:16:09 -0500
> From: "John T. Fleming" <W3GQJ at comcast.net>
> To: <tentec at contesting.com>
> Subject: [TenTec] DRM and Jupiter
> Message-ID: <009401c37100$919ab600$1c02a8c0 at HighSpeedToy>
> Content-Type: text/plain;
> charset="US-ASCII"
> MIME-Version: 1.0
> Content-Transfer-Encoding: quoted-printable
> Precedence: list
> Reply-To: tentec at contesting.com
> Message: 6
>
> I purchased the DRM software and loaded it onto my ham shack PC today. =
> I am
> using the Jupiter to supply the 12 KHz digital IF. I understand that =
> all of
> the new Jupiters have the digital IF on a miniature jack like the =
> RX-320D.
> I actually have the software loaded on my desktop PC and my laptop. I =
> was
> concerned with the lack of "line in" connector on the laptop, but that =
> did
> not seem to be a problem. It will be much easier to demonstrate the DRM
> software somewhere other then the "shack" using the laptop. I was able =
> to
> listen to CBC 9755 and RNWB 11,525. The quality is very nice. I found =
> that
> I had a bit too much output from the Jupiter even with the line in =
> turned
> down all the way with the PC control. I found I could control the level =
> by
> switching to fast AGC and also reducing the RF. If you want to try
> something new, give it a try. It does work with the Jupiter.
>
> =20
>
> The DRM software will not work with the Orion. The software needs a 12 =
> KHz
> signal. I think the Orion IF is in the 30 KHz range.
>
> =20
>
> 73,
>
> John
> W3GQJ at comcast.net
> W3GQJ at arrl.net
> <\
> ----- \ 0 _
> ----------- _\\/\-%
> ______(_)=3D=3D=3D(_)____
>
> (This is my recumbent bicycyle)
>
> ------------------------------
>
> Date: Tue, 02 Sep 2003 03:49:40 -0400
> From: Hobbes <hobbestg at voicenet.com>
> To: tentec at contesting.com
> Subject: Re: [TenTec] KWM-2 and 312B-4 are spoken for
> Message-ID: <3F544B94.111C at voicenet.com>
> References: <Law9-OE63SFsxf4yp8A000053bc at hotmail.com>
> Content-Type: text/plain; charset=us-ascii
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Reply-To: hobbestg at voicenet.com, tentec at contesting.com
> Message: 7
>
> Stan Jacox wrote:
> >
> > Hello
> > Several people were interestedin the 312B-4 Station control and emailed
at
> > about the same time. One person however wrote to request both the KWM-2
> > plus 516F-2 PS and the 312B-4. It would be better for me not to split
them
> > up so I agreed tp sell them to the person who wanted both.
> > Thank you for the interest. I guess I should have had a bunch of the
> > station controls because 6 people wanted it;>) Could I interest in
anybody
> > in the Titan and Paragon, they are just too nice to keep in storage for
a
> > few years.
> >
> > Thank you all for responding.
> > 73
> > Stan KM6XZ
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> Stan,
>
> Is there a problem with e-mail direct to you at KM6XZ at hotmail.com? When
> I respond directly I get notification that the mail cannot be delivered.
>
> Yes, I am still interested in the amplifier. Please e-mail me back your
> best offer on the amp shipped to me in NJ along with your name and
> current address since the on-line callbook does not have a listing for
> your call of KM6XZ. Also include a phone number where I may reach you
> if I have any additional questions. Thanks & 73
>
> Ed K2ZE
> ------------------------------
>
> Date: Tue, 2 Sep 2003 08:26:34 -0400
> From: "N4PY" <n4py at qvssoftware.com>
> To: <tentec at contesting.com>
> Subject: [TenTec] N4PY Pegasus/Jupiter Control Program Version 2.10
> Message-ID: <004001c3714d$72e1d890$2902a8c0 at CJMPC>
> References: <Law9-OE63SFsxf4yp8A000053bc at hotmail.com>
> <3F544B94.111C at voicenet.com>
> Content-Type: text/plain;
> charset="iso-8859-1"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Reply-To: tentec at contesting.com
> Message: 8
>
> Version 2.10 of my Pegasus/Jupiter/Argonaut V software is now available.
> All my subscribers should now have it. See my webpage at www.n4py.com for
> details about how to get it.
>
> Also, My N4PY Orion Control Program version 1.04 is also available.
>
> Carl Moreschi N4PY
>
>
> ------------------------------
>
> Date: Tue, 2 Sep 2003 07:54:35 -0600
> From: ucswayne at xmission.com
> To: Josh Kelly <jkelly at hiwaay.net>, tentec at contesting.com
> Subject: Re: [TenTec] Fw: Orion SSB
> Message-ID: <1062510875.3f54a11bab4a5 at webmail.xmission.com>
> In-Reply-To: <04d801c36e92$47b87f60$6400a8c0 at HAM>
> References: <04d801c36e92$47b87f60$6400a8c0 at HAM>
> Content-Type: text/plain; charset=ISO-8859-1
> MIME-Version: 1.0
> Content-Transfer-Encoding: 8bit
> Precedence: list
> Reply-To: tentec at contesting.com
> Message: 9
>
> could you please send the file again the attachment has just the header
> thanks
> Wayne WD7SL
>
>
> Quoting Josh Kelly <jkelly at hiwaay.net>:
>
> > I have had my Orion for 4 days.. Quite a rig.. It's a keeper. But I
> > have
> > been getting reports that I needed more
> >
> > highs. There is nothing in "the book" that I could hang my hat on. So
> > I
> > called Scott ,W4PA at TenTec.
> >
> > He wrote the book. TenTec will have a new op. manual, ie "the book"
> > soon.
> > But he was most helpful and
> >
> > emailed me the new chapter on TX audio. This is good stuff and I want
> > to
> > thank him for this info. I am
> >
> > sure all of you had already figured this out , but it was a big help to
> > me.
> > See the "clean" attach.
> >
> > 73 Josh, N4VB, 10 mi. NW of Huntsville, Alabama..........
> >
> > ----- Original Message -----
> > From: "Ten-Tec Inc. Amateur Radio Sales" <sales at tentec.com>
> > To: <jkelly at hiwaay.net>
> > Sent: Friday, August 29, 2003 1:37 PM
> > Subject: Orion SSB
> >
> >
> > >
> > > Josh:
> > >
> > > See the attached file. It's a .doc file for Word 2000, excerpted from
> > the
> > > new version of the manual that I am writing at present. For the
> > Studio
> > > One, follow what I have outlined in the document, and set the TX EQ
> > > control to about -14 dB to start. Try from there....
> > >
> > > Scott Robbins W4PA
> > >
> >
> >
>
> --------------------------------------------------------------------------
> --
> > ----
> >
> >
> > >
> > > -----------------------------------------------------------------
> > > Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
> > > Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
> > > Repair (865) 428-0364 8-4. Sales (800) 833-7373 9 am-5:30 pm.
> > > Fax (865) 428-4483 24 hrs. Visit us at <http://www.tentec.com>
> > > Email: New product sales/product info sales at tentec.com
> > > Service department
> > service at tentec.com
> > > While we make every effort to answer email in an expedient manner,
> > > the telephone is a much more efficient tool for getting a quicker
> > and
> > > more complete answer to your inquiries. Thanks!
> > >
> >
>
>
> ------------------------------
>
> Date: Tue, 2 Sep 2003 08:21:15 -0700
> From: "Stan Jacox" <KM6XZ at hotmail.com>
> To: <tentec at contesting.com>
> Subject: [TenTec] Full mailbox Titan and Paragon
> Message-ID: <Law9-OE52RMlNFhoV3a00027690 at hotmail.com>
> Content-Type: text/plain;
> charset="iso-8859-1"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Reply-To: tentec at contesting.com
> Message: 10
>
> Hello List
> Last night, apparently my hotmail account mailbox filled up and messages
> were undelivered. If anyone sent messages after 10am last night, please
> resend your message.
> The KWM-2 and 312B-4 are sold but the Titan and Paragon have not, although
I
> think several people were trying to reach me about those.
> Thanks
> Stan KM6XZ
> ------------------------------
>
> Date: Tue, 2 Sep 2003 11:43:46 -0400
> From: "dave dabay" <kd3pc at mindspring.com>
> To: <tentec at contesting.com>
> Subject: Re: [TenTec] Full mailbox Titan and Paragon
> Message-ID: <004601c37168$ffe856e0$e214fea9 at DellPOS>
> References: <Law9-OE52RMlNFhoV3a00027690 at hotmail.com>
> Content-Type: text/plain;
> charset="iso-8859-1"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Reply-To: dave dabay <kd3pc at mindspring.com>, tentec at contesting.com
> Message: 11
>
> Stan
>
> what are the details on the CX7? I remember it being a top of the line
rig.
> Does it require an outboard power supply? Could a rookie change the power
> supply.
>
> I am an unemployed Field engineer and was looking for an in-expensive way
to
> get back into radio ( I sold my entire setup in late 2001 to pay the
> payments) and could go a couple of hundred bucks or so, but I am not able
> enough to do complete rework.
>
> Anyway thanks
>
> dave
>
> ----- Original Message -----
> From: "Stan Jacox" <KM6XZ at hotmail.com>
> To: <tentec at contesting.com>
> Sent: Tuesday, September 02, 2003 11:21 AM
> Subject: [TenTec] Full mailbox Titan and Paragon
>
>
> > Hello List
> > Last night, apparently my hotmail account mailbox filled up and messages
> > were undelivered. If anyone sent messages after 10am last night, please
> > resend your message.
> > The KWM-2 and 312B-4 are sold but the Titan and Paragon have not,
although
> I
> > think several people were trying to reach me about those.
> > Thanks
> > Stan KM6XZ
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> ------------------------------
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> End of TenTec Digest, Vol 9, Issue 4
> ************************************
>
More information about the TenTec
mailing list