[TenTec] QSK CW on the Orion

[Toby Pennington]

The filters will switch at whatever frequency they are set for. (ie) the 2.4 
khz will switch at 2.4khz,  the 1.8 khz will switch at 1.8khz etc.

----- Original Message ----- 
From: "NJ0IP" <Rick at DJ0IP.de>
To: <tentec at contesting.com>
Sent: Saturday, December 04, 2004 2:44 PM
Subject: RE: [TenTec] QSK CW on the Orion


> What are the switching frequencies now for the different roofing filters?
>
> -----Original Message-----
> From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
> On Behalf Of Toby Pennington
> Sent: Saturday, December 04, 2004 11:29 AM
> To: Ten Tec List
> Subject: [TenTec] QSK CW on the Orion
>
> The guys at Ten Tec are to be congratulated for the way the RF Gain and 
> the
> QSK works now on the Orion.  Now I can work on 80 meters with the QSK down
> to 10 percent and the RF gain down to 58 to 68 and have no noise when
> sending cw, it is really smooth now and a pleasure to operate.  Also when
> set at this level there is little or no loss of signal from the station I 
> am
> talking with.
>
> This is probably the biggest improvement for cw ops that we have had so 
> far.
> Also, having the roofing filters come in at the appropriate bandwidth is a
> big improvement.
>
> If you haven't installed 1.372 you need to update your Orion and see the
> difference.
>
> Toby W4CAK
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>