[TenTec] QSK CW on the Orion

[Richard Detweiler]

With this release, it should be at the filter.  BW at 500 should switch in 
the 500 hz filter and so on.

Best 73's
Rich
K5SF

>From: "NJ0IP" <Rick at DJ0IP.de>
>Reply-To: tentec at contesting.com
>To: <tentec at contesting.com>
>Subject: RE: [TenTec] QSK CW on the Orion
>Date: Sat, 4 Dec 2004 11:44:48 -0800
>
>What are the switching frequencies now for the different roofing filters?
>
>-----Original Message-----
>From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
>On Behalf Of Toby Pennington
>Sent: Saturday, December 04, 2004 11:29 AM
>To: Ten Tec List
>Subject: [TenTec] QSK CW on the Orion
>
>The guys at Ten Tec are to be congratulated for the way the RF Gain and the
>QSK works now on the Orion.  Now I can work on 80 meters with the QSK down
>to 10 percent and the RF gain down to 58 to 68 and have no noise when
>sending cw, it is really smooth now and a pleasure to operate.  Also when
>set at this level there is little or no loss of signal from the station I 
>am
>talking with.
>
>This is probably the biggest improvement for cw ops that we have had so 
>far.
>Also, having the roofing filters come in at the appropriate bandwidth is a
>big improvement.
>
>If you haven't installed 1.372 you need to update your Orion and see the
>difference.
>
>Toby W4CAK
>
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec