[TenTec] ARGOSY Dial Cord Problems

Donnie Garrett cfzepp at comcast.net
Sun Feb 22 10:54:09 EST 2004


Rick:
Call Ten Tec service and they will send you enough of the black elastic dial
cord that you will need.  I rather doubt the smaller diameter dial cord has
failed. It's usually the larger diameter elastic cord that looses it
elasticity..  The smaller cord is tied to the larger elastic cord.  The
larger elastic cord keeps the slack out of the dial string arraignment. You
can look around locally for a substitute but I would rather go with what Ten
Tec used. I have fixed several over the years.


73, Don / WA9TGT
----- Original Message ----- 
From: "Rick Westerman" <Rick at dj0ip.de>
To: <tentec at contesting.com>
Sent: Sunday, February 22, 2004 9:29 AM
Subject: [TenTec] ARGOSY Dial Cord Problems


> My ARGOSY (Analog) dial cord and 100 kHz indicator have finally
> died.
>
> Apparently I have to remove the front panel to fix it.
>
> I'm pretty sure I'm going to need parts so I have decided I'll
> order whatever may possibly be necessary BEFORE removing the
> front panel.  I don't want to leave the rig scattered around the
> shack for any length of time (to avoid losing any parts).
>
> Does anyone have any experience fixing these and what do I need
> to order from Ten-Tec?
>
> Tnx for any tips.
>
> 73
> Rick
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>




More information about the TenTec mailing list