[TenTec] Cleaning/lubricating 253 Tuner Inductor

[holladayfd]

Pete,
You forgot to mention that if you get that stuff on your fingers, you will
wear it a LONG time!  It should be used very lightly and with caution.  It
is however, an excellent lubricant and will last for years.
73,
Frank, K4VMO
----- Original Message -----
From: <ac5e at comcast.net>
To: <tentec at contesting.com>
Sent: Friday, January 09, 2004 7:59 PM
Subject: Re: [TenTec] Cleaning/lubricating 253 Tuner Inductor


> I have had good luck with some Dri-Slide, a molybdymium based lube whose
carrier evaporates leaving just the moly lube. It should still be available
at your local gun dealers.
>
> I suspect lard should be used to grease the gullets of Osama's terrorists.
Talk about a punishment worse than death!
>
> 73  Pete Allen AC5E
> > I see that a bulb has burned out in my 253 automatic antenna coupler.
Since
> > I'm taking it out of the rack I thought I'd clean and lubricate the
inductor
> > and roller.
> >
> > Has anyone tried this?  Is there a readily available lubricant that
should
> > be used?  Or should I just leave it alone?
> >
> > Thanks!
> > 73,
> >
> > Rick
> > VE7ASR
> >
> > Website:  http://www3.telus.net/ve7asr
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>