[TenTec] Cleaning/lubricating 253 Tuner Inductor

[Dave W7DPW]

Pete,

Would you just coat the coil on the 253 with DriSlide and let it dry
or just the bearings ?  I have a 253 that is a bit noisy..

Thanks,

Dave W7DPW

----- Original Message ----- 
From: <ac5e at comcast.net>
To: <tentec at contesting.com>
Sent: Friday, January 09, 2004 6:59 PM
Subject: Re: [TenTec] Cleaning/lubricating 253 Tuner Inductor


> Yes, Dri Slide is rather long wearing, both on machinery and
unprotected fingers. I shake the can and then squirt some on a long
Q-Tip for roller inductors and such.
>
> For places where I might get some on fingers I have a tube of
mechanics protectant from the local auto parts store, from the shelf
next to the Go Jo, that keeps it from penetrating skin so it will come
off with the abrasive variety of Go Jo.
>
> 73  Pete AC5E
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec