[TenTec] Yaesu FL-7000 to Orion

[Bob Henderson]

Don

Not quite.......to interface the Orion to the FL7000 for auto band 
change you will require some logic to make the interfaces compatible.  
This will take the form of a 16 to 4 line encoder of some type.  
Definately not just a cable.  If you are not familiar with binary logic 
yourself you'll need to enlist the help of someone local to you who is.

I hope I've clarified that for you.

73  Bob, 5B4AGN

Don wrote:

>Bob
>
>
>"It is possible to auto band change the FL7000 or other Yaesu amp from 
>the Orion but not without an encoder to produce compatible band data.
>
>Yaesu provide binary parallel band data from their radios and that is 
>what the FL7000 uses for auto band switching."
>
>So if I understand this correctly to "auto" band switch all I should have to do 
>is make up the cable?  Just want to confirm that I am reading correctly.
>
>thanks
>
>Don kd6hq
>
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>  
>