[TenTec] Yaesu FL-7000 to Orion

[NJ0IP]

Here is a product ready-made for that task:

http://www.qth.com/topten/bdecoder.htm

73
Rick


-----Original Message-----
From: tentec-bounces at contesting.com
[mailto:tentec-bounces at contesting.com]On Behalf Of Bob Henderson
Sent: Tuesday, May 18, 2004 11:39 AM
To: tentec at contesting.com
Subject: Re: [TenTec] Yaesu FL-7000 to Orion


Don

Not quite.......to interface the Orion to the FL7000 for auto
band
change you will require some logic to make the interfaces
compatible.
This will take the form of a 16 to 4 line encoder of some type.
Definately not just a cable.  If you are not familiar with binary
logic
yourself you'll need to enlist the help of someone local to you
who is.

I hope I've clarified that for you.

73  Bob, 5B4AGN

Don wrote:

>Bob
>
>
>"It is possible to auto band change the FL7000 or other Yaesu
amp from
>the Orion but not without an encoder to produce compatible band
data.
>
>Yaesu provide binary parallel band data from their radios and
that is
>what the FL7000 uses for auto band switching."
>
>So if I understand this correctly to "auto" band switch all I
should have to do
>is make up the cable?  Just want to confirm that I am reading
correctly.
>
>thanks
>
>Don kd6hq
>
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>
>



_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec