[TenTec] PSK31 & the Argonaut V

[John Graves]

Charles Nagel wrote:

>Hi Jim,
>
>I used the ARGO V with DIGIPAN 2.0 with no trouble whatever. You might
>want to try this software. I assume you are using the optional fan when
>running the ARGO at full output when operating PSK31. Set the microphone
>gain at minimum and the output of the sound card as low as possible. If
>I recall my VOX setting was at about 6. Then bring up the mic gain - not
>much - just until the rig kicks into action. You need to play around
>with it a bit. Then if you don't have a PSK meter get a report from
>someone right away on the signal quality. Also if you have another
>receiver you can get an idea of the signal quality but you probably know
>this already. DIGIPAN 2.0 works well also with my Jupiter and Orion.
>It's the only software I have ever used so I can only speak to its
>operation.
>
>Charles, K0CW
>
>-----Original Message-----
>From: tentec-bounces at contesting.com
>[mailto:tentec-bounces at contesting.com] On Behalf Of We5f at aol.com
>Sent: Monday, April 18, 2005 11:11 PM
>To: tentec at contesting.com
>Subject: [TenTec] PSK31 & the Argonaut V
>
>  
>
/ /I am the proud owner of a new Jupiter.  Is this true for my rig as 
well??  The instructions are vague on digital modes.

John / WB1EHL

>output jacks on that laptop.  The Argo instructions say that is all I
>need to 
>work 
>PSK31.
>
>No problem running Ham Radio Deluxe to control the rig.  
>
>  
>