[TenTec] Mikes for old tentecs

[Mike Hyder -N4NT-]

Hello, Bill--

Suggest you go to www.mouser.com and in the search box enter 25LM022

Mouser is an excellent company and seems to appreciate all orders, not just 
large ones.

73, Mike  -N4NT-

----- Original Message ----- 
From: "w a lindsay-smith" <g3wni at btinternet.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Saturday, August 06, 2005 4:43 AM
Subject: Re: [TenTec] Mikes for old tentecs


Steve,

I have a Shure 401A hand mic now defunked and been looking for a mic for my
new TT Argonaut V.  Your suggestion seems just the answer to my problem.  I
sent the mic to Shure for repair but no joy, it is out of production and no
spares.

Could you please send me details of  Mouser, whom I know nothing about,so
that I can make contact to buy the part you recommend.  I will use the Shure
401A case to hold the insert.

I use a rather old Shure 444 on my Omni V1 and also on my previous Drake C
line.  As this is getting on I'm looking for a back-up.

  Kind regards and 73  Bill.  G3WNI
g3wni at btinternet.com

----- Original Message ----- 
From: "Steve Ireland" <vk6vz at arach.net.au>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Saturday, August 06, 2005 1:23 AM
Subject: Re: [TenTec] Mikes for old tentecs

> G'day
>
> For anyone who is looking for a REALLY cheap and excellent quality high Z
> microphone for a older Ten Tec transceiver, Mouser sell a Kobitone crystal
> cartridge for about $7 (part number 25LM022).  Simply buy a dead
> microphone
> casing that you like at a Hamfest and drop one in.
>
> I use one on my Drake T4XC and it sounds as good as an old Shure 201
> microphone that I have.
>
> Vy 73
>
> Steve, VK6VZ