[TenTec] Wiring for Studio One

[NJ0IP]

Thanks Duane, this nails down the Studio One.
Now I need to find out what the Gold line looks like.

73
Rick

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Duane A Calvin
Sent: Thursday, December 01, 2005 7:23 PM
To: Rick at DJ0IP.de
Cc: tentec at contesting.com
Subject: [TenTec] Wiring for Studio One

Rick,
        I copied down the wiring when I built the new cable for my Studio
One.  Here it is:

XLR End (viewed from the back of the connector, starting with the ground
clip at the top and going clockwise):

        Top -  Shield
        2 o'clock - n/c
        4 o'clock - Red
        7 o'clock - White
       10 o'clock - Black

Foster (rig) end:

        Pin 1 - White
        Pin 2 - Black
        Pin 3 - Red
        Pin 4 - n/c
        Shell - Shield - pull shield back and clamp under shelll clamp
between shell and cable jacket.

Hope this helps.  I don't have the pinout handy to give the signal names
for each of these lines . . .

        73,  Duane
--------------------------------------
Duane Calvin, AC5AA
Austin, Texas

http://home.austin.rr.com/ac5aa
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec