[TenTec] Orion

[Toby Pennington]

Sorry to hear that Don.   Hey, Just for grins....try the VFOB Lock button
and do the Ram Clear again.  Maybe you have changed things by attempting the
user 2 update mode.  Good luck in getting the problem resolved and Have a
Great Holiday!

Toby
W4CAK


----- Original Message ----- 
From: "Don and Diana Cunningham" <wb5hak at duracom.net>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Thursday, December 22, 2005 10:20 PM
Subject: [TenTec] Orion


> Toby, Carl and all, I re-tried the User 2/power on reset again, and
thought
> it was going to do it.  Turned the lights off, and a "garbled" screen came
> on with the "system loading" sign, then locked up.  Subsequent tries, over
a
> period do nothing, so with your help, I am afraid I am finding that it
gets
> to take a trip to Tennessee after Christmas.  Thanks to all of you for
> helping me.  On the bright side, they can check that the CPU/DSP board has
> in fact been already modded for version 2 scan like sales assured me that
> the demo units had been done while there!!  At least have a good Omni V to
> keep me going, hi.
> 73 all,
> Don, WB5HAK
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec