[TenTec] HInts for troubleshooting an OMNI D

[Ed]

On Sat, Dec 24, 2005 at 09:23:15AM -0500, Patti wrote:
> Intermittantly, while operating on 80m (sending or just receiving)  my OMNI D will fade out, with 
> the display simply reading 1.000.  Once this occurs, you can no longer send and receive. 
> 
> Turning the power off momentarily, or changing bands seems to help, for a short duration.
> This behaviour only occurs on 80.
> 
> 
> Any ideas on where to start looking?  From reading the manual, I considered the VFO AMP board, although this is not band dependant.
> 
> Any ideas would be appreciated.  I can be contacted off list as well.
> 
> Thanks
> Eric Thielking
> NC2W


Eric, try reseating the jumper for txin-txout. Check connections inside the rig, a gentle push or a reseat should work. It may also be in the bandswitch or possibly the crystal may need to be reseated. HTH  

Ed W3NR