[TenTec] RAM CLEAR ?? My first Orion II bug

[Stephen M. Shearer]

OK, the info I found:
To Activate the RAM-CLEAR feature.

1) PRESS and HOLD the VFOB-LCK button while turning on the radio.
2) WAIT until the BATTERY FAILURE message appears on the screen.
3) Answer YES when 'Clear User Memories?' appears on the screen.
4) Answer YES when 'Reset Optional Filters?' appears on the screen.
5) When radio screen appears, turn radio OFF and back ON.

BUT, 3) and 4) don't show (on the O2) is it different then the O1?
Memories are clear so it must do it automatically?

Now, I wait...
73, Steve

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Toby Pennington
Sent: Friday, December 30, 2005 8:26 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] [Orion] My first Orion II bug

The Ram Clear is the most important thing to do.........give it a try!


----- Original Message ----- 
From: "Stephen M. Shearer" <wb3lgc at verizon.net>
To: "'Discussion of Ten-Tec Equipment'" <tentec at contesting.com>
Sent: Friday, December 30, 2005 8:19 PM
Subject: Re: [TenTec] [Orion] My first Orion II bug


> I did a master reset and I am still seeing the "bug".  I will try again...
>
> Now, all I can do is listen and wait...
> 73, Steve
>
> -----Original Message-----
> From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
> On Behalf Of Toby Pennington
> Sent: Friday, December 30, 2005 8:02 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] [Orion] My first Orion II bug
>
> I suppose you guys have done a ram clear and master reset?  This cleared
the
> problem up for one BETA tester.
>
> ......
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec