[TenTec] RAM CLEAR ?? My first Orion II bug

[Toby Pennington]

Three and four do not apply on the O2 or 2.0 for the old Orion.  Toby  W4CAK


----- Original Message ----- 
From: "Stephen M. Shearer" <wb3lgc at verizon.net>
To: "'Discussion of Ten-Tec Equipment'" <tentec at contesting.com>
Sent: Friday, December 30, 2005 8:59 PM
Subject: [TenTec] RAM CLEAR ?? My first Orion II bug


> OK, the info I found:
> To Activate the RAM-CLEAR feature.
>
> 1) PRESS and HOLD the VFOB-LCK button while turning on the radio.
> 2) WAIT until the BATTERY FAILURE message appears on the screen.
> 3) Answer YES when 'Clear User Memories?' appears on the screen.
> 4) Answer YES when 'Reset Optional Filters?' appears on the screen.
> 5) When radio screen appears, turn radio OFF and back ON.
>
> BUT, 3) and 4) don't show (on the O2) is it different then the O1?
> Memories are clear so it must do it automatically?
>
> Now, I wait...
> 73, Steve
>
> -----Original Message-----
> From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
> On Behalf Of Toby Pennington
> Sent: Friday, December 30, 2005 8:26 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] [Orion] My first Orion II bug
>
> The Ram Clear is the most important thing to do.........give it a try!
>
>
> ----- Original Message ----- 
> From: "Stephen M. Shearer" <wb3lgc at verizon.net>
> To: "'Discussion of Ten-Tec Equipment'" <tentec at contesting.com>
> Sent: Friday, December 30, 2005 8:19 PM
> Subject: Re: [TenTec] [Orion] My first Orion II bug
>
>
> > I did a master reset and I am still seeing the "bug".  I will try
again...
> >
> > Now, all I can do is listen and wait...
> > 73, Steve
> >
> > -----Original Message-----
> > From: tentec-bounces at contesting.com
[mailto:tentec-bounces at contesting.com]
> > On Behalf Of Toby Pennington
> > Sent: Friday, December 30, 2005 8:02 PM
> > To: Discussion of Ten-Tec Equipment
> > Subject: Re: [TenTec] [Orion] My first Orion II bug
> >
> > I suppose you guys have done a ram clear and master reset?  This cleared
> the
> > problem up for one BETA tester.
> >
> > ......
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec