[TenTec] Omni VI & 960 Power Supply

[Able2fly at aol.com]

In a message dated 1/26/2005 9:45:51 PM Eastern Standard Time,  
k2np at lycos.com writes:

the CW  note becomes very raspy through the speaker mounted in the power 
supplies (it  happens after a period of time with both supplies, but after cooling 
down it  is OK again)..The speaker mounted in the Paragon is fine at all 
times, with no  distortion.. I was just about to try some RF "beads" on the 
speaker lines in  the power supply casing.
==============================================

RF beads won't help if the voice coil is rubbing. Loosening and re mounting  
the speaker might help, or maybe the use of a washer or similar thin spacer  
under one of the corners of it to give it a bit of a twist could do the  trick.
 
Bill  K3UJ