[TenTec] Need some help with a Model 580 Delta

[Jeff Camp]

Charlie --

I have a 580 also.  The ALC-TX ON switch adjusts the ALC when it's 
pushed in.  It keys the transmitter when you pull it out and you're in 
CW mode.  Not sure what to tell you about the band switch.  Mine clicks 
between bands and won't move at all otherwise.
The noise blanker is located on top toward the rear about even with the 
notch control knob on the front of the radio.  I'm not sure if TT 
labeled the boards, but the model number for the NB is 289.

Hope you enjoy your Delta...

73,
Jeff



Charlie Bright wrote:
> I just received a 580 I bought off ebay and was happy
> to find it receives and transmits fine (even though
> physically it looks quite rough), but it didn't come
> with a manual and I have a couple of questions I hope
> someone can help me with:
> 
> First, what does the "ALC - TX ON" control do?.  I
> seems to have a push/pull  operation in addition to
> rotating.
> 
> Second, the band switch has some slop in it's
> operation and doesn't really click into a band, but
> can be moved several degrees either way in each band
> position.  Is this normal or is there something I can
> do to correct it?
> 
> Third, how can I tell if the noise blanker is
> installed?  I think it might be a board on the top
> side, but I'm not really sure.  I don't see any place
> else to install a board, so think it may be there.
> 
> Thanks in advance for any assistance you can provide!
> 
> Charlie, we0r
> 
> 
> 	
> 		
> __________________________________ 
> Do you Yahoo!? 
> Yahoo! Mail - You care about security. So do we. 
> http://promotions.yahoo.com/new_mail
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
>