[TenTec] TT Orion and TVI problem

G.C. g.crosta at tin.it
Sun May 1 13:28:58 EDT 2005


Hi to all the guys,

many thanks for your prompt reply to my question concerning the TVI troubles.

Many of us asked for other detailed info. Here after some answers.

I use a linear power supply and not a switching type.

The model is a Daiwa PS30 XMII from 1 to 15 Volt rated at 25 A max 30 A
I have noted after a check the PS hasn't the AC gound wire installed! The plug has only two wires: live and return.
As suggested I'll try to use a 13,8 Volt car battery to check quickly the PS system.

All my neighbours have the same TV distribution system, but my TV set doesn't show any TVI problem also when I move the TV set very close to the Rtx.

All the neighbours have new TV set. The troubles are on all the TV channels and it seams they are not HF frequency dependant.

I use the internal TT Orion antenna tuner and the SWR values varies continuously from 1 to 1.5 maximum, I don't see any RF feedback
and the audio report was nice but normally I use the CW mode and reports are always very good.

The antenna feed line goes outside the rig and pass close to a TV and mains AC sockets.

I use a feedline low pass filter and T4 Radio Works line isolator.

I'll perform other tests as soon as possible. I'll be unavailable during next days due to a job journey.

Thank again.

Beppe



More information about the TenTec mailing list