[TenTec] Orion Sweep Not Functional

[Rick Williams]

I'm certainly no Orion expert, I've had mine about a month, but if you turn
off the sweep and then turn off the Orion and re-boot it should come back.

Hopefully Version 2.x.x will resolve the problem.  Then again I can live
without the sweep.

73, 

Rick 
VE7TK

Website:  http://www3.telus.net/ve7tk  

------------
To: 	<tentec at contesting.com>
Subject: 	[TenTec] Orion Sweep Not Functional
From: 	"RM" <kamar at inr.net>
Reply-to: 	Discussion of Ten-Tec Equipment <tentec at contesting.com>
Date: 	Sat, 1 Oct 2005 14:03:54 -0400
List-post: 	<mailto:tentec at contesting.com>

Have Version 1.372 installed.   I just noticed that when I engage the SWEEP
all I see is a very thin line of noise being shown.  No signals appear or
real base band noise appears in the sweep.  Did version 1.372 basically shut
down the Orion Sweep function or is this an indicator that some thing else
has failed.  Note that I did the MAIN RX/TX and hold'em down VFO B LCK
button resets and answered Yes to all clear memory without any changes;
still have the thin line of noise for a sweep with not signals being shown.
 
Ron ..... NU1U

_____