[TenTec] Paragon

[Charles Nagel]

Lee,

Unfortunately my knob isn't the configuration you describe below in that the
skirt doesn't turn. It's anchored (or molded at three points) to the inside
surface of the knob and is held on to the 1/4 inch shaft by one set screw.
It's possible I don't have the latest version of the knob assembly on this
unit which I purchased as reconditioned equipment from TT recently.

It was worth a try. Still a good radio. 

Charles, K0CW

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of B. Lee Cornwell
Sent: Sunday, October 30, 2005 6:54 AM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Paragon

Hello Charles - Slide the rubber part of the tuning knob off - This 
exposes 2 set screws that must be removed with an allen wrench - remove 
the knob and look at the back - It becomes self-explanatory - Basically 
you hold the skirt of the knob while turning the main knob - this 
changes the drag placed against the panel - a quick shot of "tri-flow" 
may be needed on the encoder shaft
73
Lee K2BLC

Charles Nagel wrote:

>Is there a way to do it? Please advise me on-list.
>
>Thanks,
>
>Charles, K0CW
>
>-----Original Message-----
>From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
>On Behalf Of Jim G
>Sent: Saturday, October 29, 2005 10:57 PM
>To: Discussion of Ten-Tec Equipment
>Subject: [TenTec] Paragon
>
>Need some help on how to decrease the tension on the tuning dial.  Please
>reply off-list to longpond at downeast.net.  Jim K1QCF
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>  
>

-- 
B. Lee Cornwell
http://home.earthlink.net/~k2blc/index.html

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec