[TenTec] Omni V.9 chip

[HUGHESRO]

Hey fellow. What software programs can u use with the V. I have a omni VI with the 305 converter. What programs can I use? I used N4PY before with Jupiter but not on omni VI. Tnxs Roger, W4IV
---------- Original Message ----------------------------------
From: J A Crux <jac.trademarks at tiscali.co.uk>
Reply-To: jac at patents.freeserve.co.uk,Discussion of Ten-Tec Equipment <tentec at contesting.com>
Date:  Tue, 29 Aug 2006 18:29:04 +0100

>I still use my Omni V.9 every day. Yes, the keypad now does things it did not 
>do before. 
>For me the biggest improvement is being able to use the serial port. For 
>example I now get to enter data directly into my logging programme. But that 
>does require a fairly straightforward hardware mod that I have never 
>regretted making.  
>
>If I was to modify another Omni V (and the local club has one sitting there 
>doing nothing) I would also check if the NVRAM X204 memory chip is socketed. 
>It gets chronic amnesia after a lot of use. I cut the dead one out and fitted 
>a turned pin 8 pin DIL socket in my Omni. I also bought a few replacement 
>chips (from Newark.)  The CMOS version is 24C04P and it works fine. In fact I 
>have not had to swap one despite many more years of use. 
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>