[TenTec] [Orion] Diff between 1.372 and 1.373b5

Toby Pennington toby423 at earthlink.net
Tue Aug 29 23:21:15 EDT 2006


1.371.b1 through 1.373b3 essentially took care of two obvious problems when
on cw using version 1.372, but created another problem.

In version 1.372 on cw there were noise bursts which would occur when
turning the BW encoder and they were deafening if you were using headphones.
Also, there were dead spots as you would turn the BW encoder with no signal.
Turning the BW encoder past the dead spot would bring the receive back to
normal.

Esentially,  by the time 1.373b3 was sent out these two problems had been
fixed.  But that is when we discovered another newly created problem with
receiver crashing.  Again in cw mode,  if you turned the BW encoder and had
the sweep running the receiver would crash eventually. The obvious
workaround was not to run the sweep.

This problem was never solved and exists in 1.373b5 also.   Toby   W4CAK


----- Original Message ----- 
From: "Alan Sewell" <alan.n5na at gmail.com>
To: <orion at contesting.com>
Sent: Tuesday, August 29, 2006 10:58 PM
Subject: Re: [Orion] Diff between 1.372 and 1.373b5


> Version 1.373b1
> - Added additional checks for Curtis keyer control to MENUs. Was only
> called on power-up.
> - Add WAIT_FOR_DSP_COMPLETE to mainRF routine. Toby P was reporting
> noise bursts.
> - Added call to agc_change in serial AGC routine.
>
> Version 1.373b2
> - Removed call to update xtal filter drivers inside the PBT_BW routine.
> This is now handled in the interrupt
>  routine. Having it in two placed was causing a conflict when writing to
> the interface chips.
> - Added main_dsp_squelch variable to handle MOX for the main receiver.
> Was inadvertantly using the sub receivers
>  squelch value for the mains MOX unmute value. This caused a SQL problem
> when the main receiver was in CW mode anytime.
>
> Version 1.373b3
> - Corrected problem in AGC system: Occasional noise burst when BW
> encoder or the RF gain knob moved.
>
> Version 1.373b4
> - Eliminated passing of AGC info to DSP. This was causing Out Of Band
> distortion when used.
>
> 01/18/05 Version 1.373b5
> - Modified serial control of SubRx AGC. Was not updating sub receiver as
> it should.
>
>
> Duane A Calvin wrote:
> > Does anyone have the errata files for what changed between 1.372 and
> > 1.373b5?   A couple of us here in central Texas are moving back to the
> > 1.3xx levels until TT gets the 2.x FW fixed for the Orion I's due to the
> > superior noise reduction, AGC adjustability, etc., etc.  We'll live with
> > the sweep/BW interaction problems.  But in order to choose between the
> > two levels mentioned, it would help to know what the fixes were (and
even
> > what broke on later 1.373b5 level, if any of that has been summarized).
> >
> >         73,  Duane  (for me and K5LN)
> >
> > --------------------------------------
> > Duane Calvin, AC5AA
> > Austin, Texas
> >
> > http://www.ac5aa.com
> > _______________________________________________
> > Orion mailing list
> > Orion at contesting.com
> > http://lists.contesting.com/mailman/listinfo/orion
> >
> >
>
> _______________________________________________
> Orion mailing list
> Orion at contesting.com
> http://lists.contesting.com/mailman/listinfo/orion
>



More information about the TenTec mailing list