[TenTec] Tuner and amp

[James C. Owen, III]

Hi Bob,
   With a lower power tune the amplifier for maximum output power
(keeping plate current within spec's of course). Then set the
required drive for maximum output and linearity by increase the
ALC on the ten-tec until output power reachs the maximum, touch
up the adjustments of the amplifier for maximum at this point.
This is the point of proper drive. Anymore will overdrive the
amplifier and less will decrease the power output. If you want
less output it's best to reduce the drive to get the output you
desire instead of reducing the loading. This way the amplifier
will be more linear.  IE always tune for maximum and then control
power by reducing drive.

--- "Chortek, Robert L" <robert.chortek at berliner.com> wrote:

> I have an Orion II and a Centurion, which work very well
> together. No
> surprise there, hi. 
> 
> What does it mean to tune up the linear as normal with maybe
> 50-75 watts
> and "then adjust the ALC adjustment until the power output goes
> to
> maximum."  I don't understand the quoted part and I will
> probably be
> embarrassed when I get an answer!
> 
> Thanks for the help,
> 
> 73,
> 
> Bob/AA6VB
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com