[TenTec] [Orion] O2 Tx audio quality

Ron Castro ronc at sonic.net
Tue Mar 21 23:43:47 EST 2006


Ron Castro
Chief Technical Officer
Results Radio, LLC


----- Original Message ----- 
From: <k6kdk at k6kdk.net>
To: <tentec at contesting.com>
Sent: Monday, March 20, 2006 8:39 PM
Subject: Re: [TenTec] [Orion] O2 Tx audio quality


> ----- Original Message ----- 
> From: "Ronald Gorski" <R.Gorski at Astronautics.com>
> To: "Ron Castro" <ronc at sonic.net>
> Sent: Monday, March 20, 2006 10:30 AM
> Subject: Re: [Orion] O2 Tx audio quality
>
>
>>>I heard another O2 user over the weekend who's audio sounded distorted,
>>>but since I was just getting ready to leave the house I didn't have a
>>>chance to talk to him.  If I run into him again (he's usually around on 
>>>75
>>>at night) I'll see if I can get an idea about what might be causing his
>>>problem, and report it back here.
>>
>> Please do. I think there are more of us out there. I am starting to think
>> that there may be a hardware problem with the audio board.
>> 73, Ron
>>
>>>Ron N6AHA
>
> Ron,   Yes, there are more of you out there.. I just had QSO w/ N9AU 
> running a O2 (worst audio I ever heard!), last night QSO w/ W6FE, with 
> same breakup on peaks, he was also running O2.  This is exactly same audio 
> break up you get if you run an O1 and load Ver 2.055.  But of course if 
> you have O1 you just cure it by going back to Ver 1.371, if you have O2 I 
> don't know what you do about it. Most are handling the frustration by 
> talking themselves into... "must be some sort of RF in the shack".. 
> hihi...
>
> -Dan
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> 



More information about the TenTec mailing list