[TenTec] No transmit on Jupiter - 15 and 17 meters

Rick Williams rick.williams at telus.net
Sun Oct 1 15:30:06 EDT 2006


It sounds like a low-pass filter board relay failure.  The repair /
diagnosis are on my website.

73, 

Rick 
VE7TK

Website:  http://www3.telus.net/ve7tk  

-------
Date: Sun, 01 Oct 2006 14:00:32 -0500
From: Karl Heimbach <kheimbach at sbcglobal.net>
Subject: [TenTec] No transmit on Jupiter - 15 and 17 meters
To: Discussion of Ten-Tec Equipment <tentec at contesting.com>
Message-ID: <45201050.6040605 at sbcglobal.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Gang,

Have not had this rig on either of these two bands for some time and 
decided to give them a try today.  Much to my dismay, I found that I am 
not transmitting on either band.

The rig works on all other bands and also receives on 15 and 17 meters.  
When using the  "TUNE" function on the radio, power supply amps increase 
on all bands including 15 and 17.  On a separate receiver, I can also 
hear a weak signal from the Jupiter when transmitting on 15 and 17 meters.

Reset the processor to factory defaults, but no change.  Suspect problem 
with bandpass filter or relay associated with bandpass filter on 15/17 
meters.

Anyone had this problem?

Thanks,

Karl - W5QJ



More information about the TenTec mailing list