[TenTec] Orion and rf feedback

[Craig Roberts]

My Pegasus' very stubborn second floor/no ground SSB RF feedback 
problems were finally solved by stringing several ferrite chokes on the 
mic cable and grounding the mic jack shell inside the rig's case.  I 
don't know if the Orion's mic connector is floating or not, but it might 
be worth checking.

Oh, I also use a 1/4 wave wire counterpoise for each band tied to the 
rig's wing nut ground connector.  I'm not sure which one of these or 
combination of these measures finally did the trick, but I don't care. 
If it ain't broke,,,etc.

Good luck and let us know what works.

73,

Craig
W3CRR