[TenTec] USB Serial Converters

[dsteele]

Carl, Will this convertor key FSK from MMTTY?

Don Steele
NT0F

----- Original Message ----- 
From: "Carl Moreschi" <n4py at arrl.net>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Saturday, February 03, 2007 3:18 PM
Subject: Re: [TenTec] USB Serial Converters


> Yes, you sure can.  These devices give you simultaneous multiple comports
> that do not interfere with each other.  There are a lot of them out there
> that have very poor driver software that will fail under heavy use at the
> higher baud rates used by Orion's, Pegasus's, and Jupiter's.  The only
> reason I recommended Keyspan is I know the driver software for Keyspan is
> very good.
>
> Carl Moreschi N4PY
> 121 Little Bell Drive
> Bell Mountain
> Hays, NC 28635
> ----- Original Message ----- 
> From: "Mark Choate" <aa0yy at sbcglobal.net>
> To: "Carl Moreschi" <n4py at arrl.net>; "Discussion of Ten-Tec Equipment"
> <tentec at contesting.com>
> Sent: Saturday, February 03, 2007 4:05 PM
> Subject: Re: [TenTec] USB Serial Converters
>
>
>> Hello Carl, and by the way, I love the new features of my Omni V.92 chip,
>>
>> question on these usb serial  thing-a-ma-jiggies. Can I leave ... I
> guess...
>> up to 4 rig/devices hooked to one USB port, and control them all
>> simultaniously? For example, First rig on some soundcard interface unit
>> running psk/rtty/etc with say "hamscope" or some other program, then a 
>> 2nd
>> rig on rig control off my logging program that I would use for catching 
>> DX
>> spots off the cluster, and both be functioning?  all on the same PC? Me
> just
>> clicking the mouse?
>>
>> I know its kind of a big question but I have been using an old multiplex
>> manual switch that I got for 10 bucks from Buxcomm, but I have to choose
>> ahead of time which rig/device I am going to use and I cant always just
>> switch back and forth without something locking up.
>>
>> I know I kind of directed this question at you Carl but anyone with info
> pse
>> respond. dont mean to be so ignorant on the topic but before I fork out
>> $100-150 for this switch/device I would rather look like a sheeny-bone
> here.
>>
>> Thanks, Mark
>> aa0yy
>>
>>
>> ----- Original Message ----- 
>> From: "Carl Moreschi" <n4py at arrl.net>
>> To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
>> Sent: Saturday, February 03, 2007 11:58 AM
>> Subject: Re: [TenTec] USB Serial Converters
>>
>>
>> > Rick,
>> >
>> > I recommend the 4 port from Keyspan at www.keyspan.com model USA-49WLC.
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec