[TenTec] Orion problem

[Carl Moreschi]

Make sure TXloop is not turned on if TXOUT and TXEN are not connected
together.

Carl Moreschi N4PY
121 Little Bell Drive
Bell Mountain
Hays, NC 28635
----- Original Message ----- 
From: <K9RT at aol.com>
To: <tentec at contesting.com>
Sent: Thursday, February 15, 2007 9:12 AM
Subject: [TenTec] Orion problem


> Well it has finally happened. First problem in an otherwise flawless
> operational Orion classic..
> My Orion receives fine, keys fine BUT no rf reaches the SO239 on the back
> panel and the keying line also won't key the amp. Panel meter says it is
> transmitting etc.
> Have triple checked everything I can think of. Last time it worked
> flawlessly the day before with no hint of a problem.
> Have turned it off an on several times with no improvement  noted.
> Only thing I haven't done yet is a full reset.
> Any suggestions before I do that would be most welcomed. Hate to do a
reset
> due to having to reset all parameters but will do so gladly if that is the
> next  sep.
> Thanks
> Dick K9RT
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec